| |
|
|
Catalogue
 |
Item Name: AN-AC-8RU-001
Item Description: 8 Rack Unit 600 Watt Air Conditioning Unit R22
Gas
|
| |
|
| Product Description |
This cooling
unit has been designed and built for the deployable EDAK 8 RU
Equipment Case. The unit is robust and has been tested to Military
Specification. It is covered by a 1 year warrantee from the date of
supply. The unit will
dissipate heat from the case to a total capacity of 600 watts at 35
degree’s Celsius Ambient temperature.
The unit is not designed to operate above 50 degrees Celsius
but is capable of operating to approximately 55 degrees Celsius for
limited periods. The unit will also operate in temperate below 10
degrees Celsius.
The unit uses R22 Gas |
| Back to Top |
|
|
|
Item Name: AN-AC-8RU-002
Item Description: 8 Rack Unit 500 Watt Air Conditioning Unit 417A
Gas
|
| |
|
| Product Description |
This cooling
unit has been designed and built for the deployable EDAK 8 RU
Equipment Case. The unit is robust and has been tested to Military
Specification. It is covered by a 1 year warrantee from the date of
supply. The unit will
dissipate heat from the case to a total capacity of
500
watts at 35 degree’s Celsius Ambient temperature.
The unit is not designed to operate above 50 degrees Celsius
but is capable of operating to approximately 55 degrees Celsius for
limited periods. The unit will also operate in temperate below 10
degrees Celsius.
The unit uses R417A "Green" gas. |
| Back to Top |
|
 |
Item Name: AN-AC-10RU-001
Item Description: 10 Rack Unit 1000 Watt Air Conditioning Unit
R22 Gas
|
| |
|
| Product Description |
This cooling
unit has been designed and built for the deployable EDAK 10 Rack
Unit Equipment Case
fitted with computing, networking or electronics equipment.
The unit is robust and has been tested to Military
requirements.
It is covered by a 1 year warrantee from the date of supply.
The unit will dissipate heat from the case to a total
capacity of 1000 watts at 35 degree’s Celsius Ambient temperature.
The unit is not designed to operate above 50 degrees Celsius
but is capable of operating to approximately 55 degrees Celsius for
limited periods. The
unit will also operate in temperate below 10 degrees Celsius.
R22 Gas is used. |
| Back to Top |
|
|
|
Item Name: AN-AC-12RU-001
Item Description: 12 Rack Unit 1000 Watt
Air Conditioning Unit R22 Gas
|
| |
|
| Product Description |
This cooling unit has been designed and built for the deployable
EDAK 12
Rack Unit Equipment Case
fitted with computing, networking or electronic equipment.
The unit is robust and has been tested to Military
requirements.
It is covered by a 1 year warrantee from the date of supply.
The unit will dissipate heat from the case to a total
capacity of 1000 watts at 35 degree’s Celsius Ambient temperature.
The unit is not designed to operate above 50 degrees Celsius
but is capable of operating to approximately 55 degrees Celsius for
limited periods. The
unit will also operate in temperate below 10 degrees Celsius.
R 22 Gas is used. |
| Back to Top |
|
 |
Item Name: AN-TRNS-XXRU-001
Item Description: Air Conditioner Transit Case
|
| |
|
| Product Description |
For each of the air conditioning
models, an optional transit case is available. These are light
weight moulded plastic. |
| Back to Top |
|
.jpg) |
Item Name: AN-DEP-ECU-SYS-001
Item Description: 20KVA Environmental Control Unit
|
| |
|
| Product Description |
The Deployable Environmental Control Unit (ECU) is a 20KVA chiller unit operating from 415V 3 phase power. The Unit has been designed to meet harsh environmental conditions. The ECU can be deployed into shelters, tents, enclosed marquees, containers, demountables or existing closable structures. The uses vary from military use, medical, emergency temporary office / accommodation, entertainment, food preparation, food storage and anywhere climate control is required or desired.
The ECU can be situated up to 75m away from the end use location and utilizes small hoses connecting to upto two Fan Control Units (FCU) to provide the cooling or heating to the end user.
The Environmental Control System for a standard 25m separation consists of;
• 1 x Environmental Control Unit
• 2 x Fan Control Units
• 1 x Utility Box
o 3 x Power Supply and Inter-connecting Power Cables with NATO fittings
o 2 x Control cables
o 6 x Self sealing small diameter inter-connecting hoses with quick connect couplings (no tools needed)
o 5 liters of System Top Up Fluid
o 4 x detachable leveling and mobility wheels
o Operating instructions. |
| Back to Top |
|
|
|
Item Name: AN-DEP-ELC-SYS-001
Item Description: Deployable Power Wiring System
|
| |
|
| Product Description |
The deployable modular power system has been designed to meet the power requirements in a variety of deployable shelters, tents, marquee’s, containers or demountables used for Military, medical, emergency, temporary office/accommodation and entertainment.
The power system can be modified to operate on a variety of international electrical standards (IE Australian, UK, USA, China etc) by the use of interchangeable inserts.
The deployable power kit consists of 6 x 4 power outlets, 1 x 16A starter cable with a thermal overload, 12 x T-piece adaptors, 12 x 16A inter-connecting cables and 1 x 16A 10m extension cable all housed in a transport case.
In a standard 3x5M shelter or tent, the power system would consist of 2 x installation kits, providing 24 power outlets down each side of the tent. The inter-connection cables can be positioned in the existing Velcro channels that run down each side of most brands of tent or modified to be attached to any environment.
|
| Back to Top |
|
 |
Item Name: AN-DEP-LGT-SYS-001
Item Description: Deployable LED Lighting System
|
| |
|
| Product Description |
The deployable LED lighting system has been designed to replace or upgrade the existing fluorescent lighting systems currently used in a variety of deployable shelters, tents, marquee’s, containers or demountables used for Military, medical, emergency, temporary office/accommodation and entertainment.
Mounting the lighting system takes less than 10 minutes and can be scaled to any size.
The LED lighting deployable kit consists of 4 LED units, 1 transformer and a control box all housed in a transport case.
In a standard 3x5 M shelter or tent the installation would consist of 2 rows of 4 LED units i.e. 2 kits, which would deliver a similar light output (Lux) to the existing fluorescent system used in this size tent by the Australian Defence Force.
|
| Back to Top |
|
Deployable Fiber Network Infrastructure
|
|
Item Name: AN-DEP-CIS-SYS-001
Item Description: Deployable Fiber Network
Infrastructure (DRN & DSN)
|
| |
|
| Product Description |
The Deployable Fiber Network Infrastructure has been designed to meet the networking requirements in a variety of deployable shelters, tents, marquee’s, containers or demountables used for Military, medical, emergency, temporary office/accommodation and entertainment.
The fiber network system can be re-designed to meet client requirements and specifications. This current system has been designed to meet Defence Restricted and Secret networking requirements.
The fiber networking system is deployed and operational in 5 minutes and can be scaled to any size.
The current PAS system consists of 4 x 3-port LC outlets bars, 12-port consolidation bar, distribution cable, consolidation cable (24m) and enough patch leads to connect 12 devices.
The current ACT system replaces the fiber outlet and consolidation with 3 port POE UTP bars but still employs the OM3 cabling system for connectivity.
In a standard 7.5mx4.5m tent, a fiber network could be deployed along each side of the tent providing 12 outlets. The cable drops have been designed to suit the existing Velcro channels that run down each side of most brands or tents or modified to be attached to any environment.
|
| Back to Top |
|
|
|
|
|
